---
service: "Servers Australia"
status: "partial_outage"
reports_last_hour: 0
reports_last_12_hours: 0
baseline_reports_per_hour: 0
checked_at: "2026-11-02T02:16:56.343Z"
url: "https://instatus.com/now/serversaustralia.com.au"
official_status_page: "https://status.mysau.com.au"
website: "https://www.serversaustralia.com.au"
---

# Is Servers Australia down?

It's partly down. 0 reports in the last hour.

## Official updates

- **S3 Object Storage – Intermittent Service Disruptions** (MONITORING, 2026-10-29T19:58:39.000Z): We have made significant progress in restoring stability to our S3 Object Storage service. The storage issue identified as the primary cause of the intermittent disruptions has now been resolved, and the affected portion of the storage cluster has returned to normal operation. The cluster is continuing to recover from the earlier disk failure, and some background recovery operations remain ongoing. Our team is closely monitoring service performance and working with our hardware vendor to address the remaining recovery and capacity concerns. While we expect service stability to improve following this recovery, we are continuing to monitor for further disruptions before considering the incident fully resolved. We will provide further updates as the situation progresses.
- **Critical PHP Vulnerabilities (CVE-2026-109618 and CVE-2026-109619)** (IDENTIFIED, 2026-10-23T00:20:37.000Z): <h2>Critical PHP Security Vulnerabilities – Plesk Security Update</h2> The PHP project released security updates on <b>21 October 2026</b> addressing two vulnerabilities, both rated Critical. As Plesk includes and uses PHP, these vulnerabilities may affect Plesk installations. These vulnerabilities are within PHP itself and are not vulnerabilities in the Plesk application code. <br> <b>Identified Vulnerabilities:</b> - <a href="https://www.cve.org/CVERecord?id=CVE-2026-109618">CVE-2026-109618</a><br> - <a href="https://www.cve.org/CVERecord?id=CVE-2026-109619">CVE-2026-109619</a> <br> <h3>Affected and Patched Product Versions</h3> <b>PHP on Plesk Obsidian for Linux</b> <br> <b>PHP 8.5</b><br> Affected: 8.5.11 and below Patched: 8.5.12 <br> <b>PHP 8.4</b><br> Affected: 8.4.26 and below Patched: 8.4.27 <br> <b>PHP 8.3</b><br> Affected: 8.3.35 and below Patched: 8.3.36 <br> <b>PHP 8.2</b><br> Affected: 8.2.34 and below Patched: 8.2.35 <br> <b>PHP 8.1 (End of Life)</b><br> Affected: 8.1.34 (built before 21 October 2026) Patched: 8.1.34 (built on 21 October 2026) <br> <b>PHP 8.0 (End of Life)</b><br> Affected: 8.0.30 (built before 21 October 2026) Patched: 8.0.30 (built on 21 October 2026) <br> <b>PHP 7.4 (End of Life)</b><br> Affected: 7.4.33 (built before 21 October 2026) Patched: 7.4.33 (built on 21 October 2026) <br> <h3>PHP on Plesk Obsidian for Windows</h3> <b>PHP 8.5</b><br> Affected: 8.5.11 and below Patched: 8.5.12 <br> <b>PHP 8.4</b><br> Affected: 8.4.26 and below Patched: 8.4.27 <br> <b>PHP 8.3</b><br> Affected: 8.3.35 and below Patched: 8.3.36 <br> <b>PHP 8.2</b><br> Affected: 8.2.34 and below Patched: 8.2.35 <br> <h3>Plesk Obsidian – Internal PHP Engine</h3> <b>Plesk for Linux (sw-engine component)</b> <br> Affected versions:<br> - Plesk Obsidian 18.0.80 Update 10 and below - Plesk Obsidian 18.0.81 through Update 3 <br> Patched versions:<br> - Plesk Obsidian 18.0.80 Update 11 (18.0.80.11) - Plesk Obsidian 18.0.81 Update 4 (18.0.81.4) <br> <b>Plesk for Windows (plesk-engine component)</b> <br> Affected versions:<br> - Plesk Obsidian 18.0.80 Update 10 and below - Plesk Obsidian 18.0.81 through Update 3 <br> Patched versions:<br> - Plesk Obsidian 18.0.80 Update 11 (18.0.80.11) - Plesk Obsidian 18.0.81 Update 4 (18.0.81.4) <br> <h3>Action Required</h3> Customers operating Plesk servers are strongly encouraged to review their installed Plesk and PHP versions and apply the relevant security updates as soon as possible. <br> <b>To update your Plesk installation:</b> <br> 1. Log into your Plesk control panel.<br> 2. Navigate to Tools &amp; Settings &gt; Updates and Upgrades.<br> 3. Install the latest applicable Plesk updates, including version 18.0.80.11 or 18.0.81.4, depending on your installed release.<br> 4. Verify your installed Plesk version under Tools &amp; Settings &gt; Server Components.<br> 5. Review your installed PHP versions under Tools &amp; Settings &gt; PHP Settings.<br> 6. Ensure all applicable PHP versions have been updated to the patched releases listed above. <br> <b>Important:</b> For end-of-life PHP versions such as 7.4, 8.0 and 8.1, the PHP version number may remain unchanged after patching. The build date and installed package information should be checked to confirm the applicable security updates have been applied. <br> <h3>Further Information</h3> For further details about these vulnerabilities and the available security updates, please refer to the official Plesk documentation: <br> <a href="https://support.plesk.com/hc/en-us/articles/44397729587351-Vulnerability-CVE-2026-109618-and-CVE-2026-109619-PHP2Shell-Remote-code-execution-in-PHP-shipped-with-Plesk">Plesk Security Advisory – CVE-2026-109618 and CVE-2026-109619</a> <br> For guidance on viewing and managing PHP versions within Plesk, please refer to: <br> <a href="https://docs.plesk.com/en-US/obsidian/administrator-guide/web-hosting/php-management/configuring-php-handlers.75149/">Plesk Documentation – Configuring PHP Handlers</a> <br> We understand that applying security updates may require additional planning, particularly for environments running older PHP versions or applications. We appreciate your patience and cooperation as we work together to ensure the ongoing security of your services. For further updates, please continue to monitor <a href="https://status.mysau.com.au">Servers Australia's Status Page</a>.

## Servers Australia outage FAQ

### Is Servers Australia down right now?

It's partly down. 0 reports in the last hour.

### Is Servers Australia down for everyone or just me?

It looks like it's just you. Reports for Servers Australia are at their usual level, so try reloading, checking your connection, or signing out and back in.

### What problems are people reporting with Servers Australia?

Nobody has said what's broken with Servers Australia in the last hour. If something isn't working for you, pick it above so others can see.

### When was the last Servers Australia outage?

Reports for Servers Australia haven't spiked in the last 30 days.

### Does Servers Australia have a status page?

Yes. Servers Australia posts updates on its official status page, which currently says partial outage.

[Go to status page](https://status.mysau.com.au/)

### What can I do if Servers Australia isn't working?

Check this page and Servers Australia's status page for updates, and wait a few minutes before trying again. Skip reinstalling: if it's an outage, the fix is on their side.

### How do I report a Servers Australia problem?

Hit “I have an issue too” at the top of this page and pick what's broken. Your report shows on the live chart within a minute, and you can leave a comment to tell others what you're seeing.

### How does Instatus Now know?

We combine reports from people on this page with Servers Australia's official status page, which we check every minute.